Software–Defined Ground Penetrating Radar Using COTS SDRs and GNU Radio Companion
Abstract
This paper investigates the use of Software-Defined Radio (SDR) for Ground Penetrating Radar (GPR) to detect shallowly buried objects, and evaluates its performance against a commercial off-the-shelf (COTS) GPR system. Traditional GPR implementations typically employ separate transmitting and receiving antennas on handheld devices or vehicle-mounted platforms. Small rotor-based unmanned aerial vehicles (UAVs) paired with inexpensive sensors can reduce cost, effort, and time in GPR surveys. However, achieving high resolution often requires bulky, expensive, and power-intensive systems that are unsuitable for UAV payloads. SDR presents a promising alternative by offering compact, low-cost, and reconfigurable radar capabilities. This project demonstrates the viability of an SDR-based GPR (SD-GPR) as a capable and cost-effective alternative to conventional systems for detecting shallowly buried targets. The SD-GPR is implemented in GNU Radio Companion (GRC) as a stepped frequency continuous wave (SFCW) radar, with measurements collected in a controlled test environment containing known buried targets. Simulations and post-processing in Python are further used to generate and analyze GPR B-scans, providing cross-sectional images of the subsurface response.
Downloads
Published
Issue
Section
License
- I grant gnuradio.org a perpetual, non-exclusive license to distribute this article.
- I certify that I have the right to grant this license.
- I understand that submissions cannot be completely removed once accepted.
- I understand that gnuradio.org reserves the right to reclassify or reject any submission.