Implementation and Analysis of ExpressLRS Under Interference Using GNU Radio
Abstract
ExpressLRS is an open-source high-refresh radio control link that has proven resilient to interference while maintaining a maximum achievable range at that rate with low latency. Designed to be the best FPV Racing link, it is based on the Semtech SX127x/SX1280 LoRa hardware combined with an Espressif or STM32 processor. We build the first known open-source implementation of ExpressLRS in GNU Radio by building upon the existing GNU Radio implementation of LoRa (known as gr-LoRa), to support frequency hopping. ExpressLRS is designed to operate in both 900 MHz and 2.4 GHz. We present performance evaluation results from both software-in-the-loop and hardware-in-the-loop tests based on the ADALM PlutoSDRs and COTS platforms that support the ExpressLRS protocol. We measure the performance of ExpressLRS in the presence of different types of RF interference. The source code for this project is available at: https://github.com/Diamond-D0gs/GNU_Radio_ExpressLRS.
Downloads
Published
Issue
Section
License
- I grant gnuradio.org a perpetual, non-exclusive license to distribute this article.
- I certify that I have the right to grant this license.
- I understand that submissions cannot be completely removed once accepted.
- I understand that gnuradio.org reserves the right to reclassify or reject any submission.